Loki-PSS and Loki-HBS Circuit Boards
Loki Kit
Loki Kit
Loki-Lite
Loki Kit
Loki Kit
Loki Kit
Loki Kit
Loki Kit
Loki Kit
Loki Kit

Loki Kit

Regular price$29.00
/
Shipping calculated at checkout.

Named after the Norse god of mischief, the Loki kit tricks Bitmain X19 miners into hashing from any suitable DC power supply. Want to run your X19 rig from a 120V outlet? Use the Loki kit to make it possible and unlock new gen miner hash rates and efficiencies.

Using the Loki Kit to build a 120V modified miner ("Loki Rig") will require some DIY building and creativity. Check out the Loki Plebs Telegram group for ideas and support. You'll need a power supply that can run from 120V, at least one X19 hash board, a control board, an enclosure, and a way to keep everything cool. If running from a 120V standard outlet, be sure to keep the miner's power draw under 1400W to avoid overloading the circuit breaker. Refer to the Loki Kit User Manual for more details.

Important: There are 3 different Loki Kit variants. Selecting the correct variant for your miner depends on three factors: miner firmware, control board type, and hash board type. Use the buttons below to configure your Loki Kit variant. You can also check out the Loki Bingo card for more configuration details. Don't see your miner configuration? Don't hesitate to reach out to us. You may qualify for half off on your Loki Kit if you're willing to test a new configuration.

International Customers: By ordering the Loki kit through your region's distributor, you can save money and enjoy a hassle-free purchasing experience. Simply click your region's link below to access the distributor's website. Don't see your region? We're working to set up global distribution as quickly as we can. In the meantime you might consider using a forwarding service like myus.com.

Canadian Customers

FOR NJORD CLOUDLINE

FOR LOKI KIT

  • PSU: If you're planning on powering your miner from 120V AC, you'll need a compatible power supply. Bitmain's APW3++ and APW7 are good candidates.

FOR NJORD CLOUDLINE

Q: Will the Njord Cloudline board work with my miner?

A: The Njord Cloudline board was designed to work with any miner that uses the 4-pin PWM fan control protocol and has 4 identical horizonal, in-line fan ports. It has been tested and confirmed to work on the following Bitmain miners: T17, T17+ S17, S17+, S19, S19 Pro, S19j Pro, L7, KA3. Don't see your miner model on the list? Reach out! You may be able to get 50% off your order if your miner model qualifies for testing.

Q: Will the Njord Cloudline board work with Bitmain's Amlogic control board?

A: Yes

Q: Will the Njord Cloudline board work with Bitmain's Beagle Bone Black control board?

A: Yes

Q: Will the Njord Cloudline board work on Whatsminer rigs?

A: No, this version of the Njord Cloudline board won't work with Whatsminer rigs, but we plan to release a version that does in the coming months. Stay tuned!

Q: What happens if the AC Infinity fan loses power or malfunctions?

A: The Njord Cloudline board is designed to detected if the AC Infinity fan has lost power and will send a signal to the control board. This will cause the miner to shut down with a fan error.

Q: Can I use the Njord Cloudline board with a cheaper fan?

A: The Njord Cloudline board was designed to work specifically with AC Infinity Cloudline fans. It will not work with other fans unless they follow the same EC motor control protocol and have the same USB-C connector. If you're looking to control a different fan type, consider using the Njord Protean board.

Q: Will this work with the Braiins control board?

A: No, not out of the box, but you can buy fan extension cables that will make it compatible. See the "Third Party Gear" section for more details.

Q: Can I use the Njord Protean board with my S9?

A: No, not out of the box, but you can buy fan extension cables that will make it compatible. See the "Third Party Gear" section for more details.

FOR LOKI KIT

Q: Will the Loki Kit work with the ePIC UMC control board?

A: Yes!

Q: Will the Loki Kit work with the miner config I want to build?

A: Maybe! Check the Loki Bingo card to see if you're miner config has been tested.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


Paying With Bitcoin?

Get 15% off your entire order every time with no limitation when you pay with Bitcoin! Use discount code "BTCPay" AND select the "Bitcoin with BTCPay Server" payment option at checkout. Note: Credit card orders submitted with "BTCPay" discount code will be rejected.

You may also like


Recently viewed